Worldwide shipping
Most new products are shipped factory direct from MID-WEST locations.
We accept (over the phone)
or check / moneyorder
*** Before mounting tires *** painting or powder coating new rims.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
please make sure rims will mount properly to hubs.
Click here to view all our rims
** NEW .**
Single Bevel rear rims for John Deere AO, AR, BO, BR
AO, AR, BO, BR
Bump Rims shown single bevel only available
click either picture to enlarge
|
11x26 |
$240.00
plus S & H |
AO, AR, BO, BR
Bump Rims shown single bevel only available
click either picture to enlarge
|
12x26 |
$240.00
plus S & H
|
Replacement for Waffle rims..M`s and 40`s
10x24 12x24 $285.00
12X 26 $285.00
 click either picture to enlarge
|
40 Pounds |
$260.00
plus S & H |
|
|
|
Flat base rims (to fix the wavey rims for M`s and 40`s)
7x24 |
31 pounds |
$110.00 plus S & H |
8x24 |
33 pounds |
$110.00 plus S & H |
9x24 |
37 pounds |
$115.00 plus S & H |
10x24 |
38 pounds |
$130.00 plus S & H |
12x24 |
38 pounds |
$165.00 plus S & H |
12x26 |
58 pounds |
$180.00 plus S & H |
Deep Drop Double Bevel - Changes from 36" to 38" tires
12x36 to 38 "Mannheim"
Fits John Deere 3020, 4020 |
Double bevel |
$305.00 plus S & H |
16x38 to 42 "Step-up" |
Double bevel |
$475.00 plus S & H |
18x38 to 42 "Step-up" |
Double bevel |
$480.00 plus S & H |
16x34 to 38 "Step-up" |
Double bevel |
$435.00 plus S & H |
Double Bevel
10x24 |
$215..00 plus S & H |
12x24 |
$215.00 plus S & H |
15x24 |
$230.00 plus S & H |
12x26 |
$215.00 plus S & H |
10x28 |
$215.00 plus S & H |
11x28 |
$205.00 plus S & H |
12x28
click picture to enlarge
|
$225.00 plus S & H |
13x28 |
$235.00 plus S & H |
15x28 |
$265.00 plus S & H |
14x30 |
$240.00 plus S & H |
15x30 Measure inside dia. 27.25 or 25.25 Need that measurement |
$265.00 plus S & H |
8x32 |
$260.00 plus S & H |
10x34 |
$260.00 plus S & H |
16x34 |
$280.00 plus S & H |
9x36 |
$250.00 plus S & H |
12x36 |
$280.00 plus S & H |
10x38 |
$235.00 plus S & H |
12x38 |
$240.00 plus S & H |
14x38 |
$265.00 plus S & H |
16x38 |
$285.00 plus S & H |
18x38 |
$305.00 plus S & H |
Deep Drop
10x24 |
$195.00 plus S & H |
12x24 |
$200.00 plus S & H |
15x24 |
$220.00 plus S & H |
12x26 |
$205.00 plus S & H |
10x28

click picture to enlarge |
$200.00 plus S & H |
11x28

click picture to enlarge |
$210.00 plus S & H |
12x28 |
$210.00 plus S & H |
13x28 |
$220.00 plus S & H |
15x28 |
$245.00 plus S & H |
14x30 |
$245.00 plus S & H |
15x30 |
$425.00 plus S & H |
8x32 |
$220.00 plus S & H |
10x34 |
$225.00 plus S & H |
9x36
will not fit cast centers
use to fix cut-offs only!! |
$225.00 plus S & H |
16x34 |
$245.00 plus S & H |
10x38
click either picture to enlarge
|
$205.00 plus S & H |
11x38 |
$225.00 plus S & H |
12x38 |
$235.00 plus S & H |
14x38 |
$240.00 plus S & H |
Spin Out Rims (also 5 rail rims available )
10x24 (4 rail) |
54 pounds |
$305.00 plus S & H |
12x24 (4 rail) |
65 pounds |
$320.00 plus S & H |
15x24 (4 rail) |
94 pounds |
$345.00 plus S & H |
10x28 (4 rail) |
70 pounds |
$305.00 plus S & H |
11x28 (4 rail) |
70 pounds |
$305.00 plus S & H |
12x28 (4 rail)
click picture to enlarge
|
85 pounds |
$320.00 plus S & H |
13x28 (4 rail) |
86 pounds |
$325.00 plus S & H |
15x28 (4 rail) |
97 pounds |
$350.00 plus S & H |
Wheel hardware
 click picture to enlarge |
One stop...NEW with bolt included
(can be sold seperately) |
$16.00 plus S & H |
 click picture to enlarge |
rim lock pins...NEW
original one on far left in picture |
$12.00 ea. plus S & H |
 click picture to enlarge |
main body hardware (good used) |
$ call for $$$$$ |
Front Rims
FWA Waffle Wheel 15 x 28 Front
click picture to enlarge
|
$210.00 plus S & H |
3 X 15 6 Bolt MT, 320, 330, 420, 430, 1010, 1020, 2020, 2030, 820(3 Cyl) - R |
$70.00 plus S & H |
8 X 15 6 Hole - C |
Call for $$$ |
Need Help ???

OR
call 877-602-3994
Disclaimer: Tony Carbaugh Enterprises LLC (Tony Carbaugh) will not be held responsible for any damage or loss due to the use of the products we sell. It is up to the customer to determine how products are used and the customer takes full responsibility for any and all safe handling, and use. |